The new level 5.9 axle/hub set, similar to our Level 5 system but with some major upgrades, the inner cv and now featuring our new tapered high quality aircraft grade axle bars. We now have created a Pro race worthy system that works with the standard spline size on the differential end, that can be used with Quaife, Wavetrac and other aftermarket limited slip diffs and spools.
What we have done is made a new ball & cage inner cv from high quality chromoly. This inner cv now has 6 contact points and is stronger than a Porsche 930 (108mm) cv (same cv used by many high dollar systems). This along with the 33 spline outer and new 36 spline tapered bars makes it the strongest set of axles to date.
The Kit comes with both axles and a set of custom hubs that will fit the stock bearing sizes and extended ARP studs.
This system is designed for 1000WHP and tire size will not affect its strength.
- Front axles + hubs
- Rated for 1000HP
- This system does not come with ABS Rings.
- Must use K20 RSX / EP Civic Si Intermediate Shaft
- The Level 5.9 hubs are made for 94-01 Integra /92-00 Civic with ABS or 99-00 Si knuckles. If you are using these for a Civic that did not have ABS, you must change the knuckles to one of the above due to the wheel bearing size.
- These axles are for EG or EK using EKK2 or Lean Mounts only, if you are using EKK1 mounts, see Part# KK56
- Vehicle fitment below is a general guide of what vehicles this kit will fit however modification and/or changing parts are required.
1992-1995 Honda Civic (with ABS Civic or Integra Hubs)
1996-2000 Honda Civic (with EG Subframe and EKK2 or Lean Mounts)